The Overlying

Particular attention is paid to ways of fixing takzhenado separate elements to each other and install gutters (trays). Any system of external drainage system consists of a horizontal wall or hanging gutters and vertical gutters and drains through which the vertical elements drain systems are connected with horizontal elements. When the device outside the organized drainage districts in the snow is not recommended to do so-called wall-trench. (A valuable related resource: New York Life ). It is advisable to install only pendant trays under the edge of the eaves (plum). In this case the outer, open end of the tray should be above the plane of the conditional, as if continuing the overlying surface of the slope. It is necessary that the snow slide down the roof, tore off the tray with no bindings.

The middle tray (bottom) should be on the vertical edge of a plum Extrusion, so that all rain water drains into drainage systems lotok.Sovremennye have a full complete set of all required elements, including fasteners. The shape of gutters and pipes can be circular and rectangular. Application of a particular element type is determined by aesthetic perception and the overall architecture of the building chosen architect or owner of the building. Rainwater systems have a wide range of sizes of gutters and pipes. The size of each element is calculated in accordance with the regulations, there is always a opportunity to combine the dimensions of elements, making each time an optimal choice for the cost of the kit. In the calculation takes into account slope and roof area, as well as the number and location of the points of water flow. The cost of the system drainage is usually determined by the complexity of the roof, elevations, and of course, the area. Material of construction of the roof, generally does not affect the choice of the system. At the same time, experts are selected sovetstveno gutters and roofing from the same company that will pick up and perfect color, and attachment.

Comments are closed.